1. Home
  2. Gourd Racks
  3. AAA16 Gourd Rack
AAA16 Gourd Rack
AAA16 shown with optional Troyer Gourds

AAA16 Gourd Rack

0 Review(s) Write a Review
Your Price: $339.95
Part Number: AAA16H
Availability: In Stock. Shipping is included in price.
AAA16 Gourd Rack (without gourds) (AAA-16H):


Features: It features a four-part pulley system for easy raising and lowering; eight aluminum angle arms that extend from the hub approximately 33-inches.  The all-aluminum hub has nylon glide tabs for squeak-free operation plus sixteen Horizontal Gourd Mounting Arms; 45-feet of polyester rope; an aluminum rope cleat; and a 2-inch-square aluminum pole assembly with a plastic pole cap and two solid 3/8" top perch rods.

Materials: Aluminum pole, aluminum ground stake, aluminum hub, and eight aluminum angle arms. Also included are sixteen Horizontal Gourd Mounting Arms.

Dimensions: Two-inch square high-tensile strength two-piece aluminum pole and stands 14-feet above the ground when installed.  Square poles are superior in strength to round martin poles.

Gourd Mounting Arms: Eight 3/8" solid aluminum Horizontal 90 Gourd Mounting Arms plus eight Horizontal Straight GMA's.  GMA's are small gourd arms which bolt on to the rings or the angle arms.  The Horizontal Gourd Mounting Arms have a drilled hole at the end of the arm.  Slip your gourd onto the pin and insert your supplied stainless hitch pin.  The pin will keep your gourd from falling off.

Gourd Accommodation: Any plastic or natural gourd can be fitted to these horizontal-style Gourd Mounting Arms, whose neck does not exceed 3".  If your gourds are not already drilled front to back in the upper neck, use a 13/32" drill bit to enlarge the hanging holes.

Four-part pulley system: Each of the pulleys carries a 1/4 of the load.  If your 12 gourds and hub weigh a total of 60 pounds, you are pulling around 15 pounds.  Always wear a good pair of grippy gloves when raising or lowering any gourd rack.

Extras:  The crossbar design makes for quick easy nest checks!

An optional pole guard (PGS or EZ2) that fits a square pole is available.

Instruction Manual

Recently Viewed Items

TOP