1. Home
  2. Gourd Racks
  3. Gourd Racks
  4. Super-Deluxe 12 Purple Martin Gourd Rack
SDGR12H Shown with optional Crescent-holed SuperGourds that have been drilled front to back
SDGR12H Shown with optional Crescent-holed SuperGourds that have been drilled front to back

Super-Deluxe 12 Purple Martin Gourd Rack

0 Review(s) Write a Review
Your Price: $349.95
The original Super-Deluxe Gourd Rack has been available for over 20 years. It is a perennial favorite of martin landlords everywhere. Developed by Creative Universe this superb 12 unit gourd rack features stainless steel gourd arms. Its a best seller, with features you and the your martins will benefit from.
Part Number: SDGR12H
Availability: In Stock. FREE Shipping OVER $49.00

*Choose Options From Drop Down Menu

Super-Deluxe 12 Rack (without gourds) (SDGR12H): 

Stainless Gourd Arms: Ideal for areas with high winds
Bundle with your favorite Starling-resistant Gourds

Bundle:  You can bundle your favorite starling-resistant gourds.  Price changes with option chosen.

Features: It features a four-part pulley system for easy raising and lowering.  The gourd arms slip easily in and out of the all-aluminum, assembled hub, which has nylon glide tabs for squeak-free operation. Also included; twelve 3/8” high-strength stainless steel arms; 45-feet of polyester rope; an aluminum rope cleat; and a 2-inch-square aluminum pole assembly with a plastic pyramid pole cap and two solid 3/8" top perch rods.

Materials: Aluminum pole, aluminum ground stake, aluminum hub brackets, assembled to aluminum angle sides using stainless steel hardware.  Twelve high-strength 3/8" stainless steel gourd arms.

Dimensions: Two-inch square high-tensile strength two-piece aluminum pole and stands 14-feet above the ground when installed.  Square poles are superior in strength to round martin poles.

Gourd Arms: Twelve solid stainless steel.  Arms for "Deluxe" and "K-Series" style gourd racks have a 90-degree bend on the end that slips into the hub bracket.  There are three configurations; straight that slip into the single hole on the hub bracket, and left and right, which are paired in an adjacent side of the hub.  The horizontal gourd arms have a drilled hole at the end of the arm.  Slip your gourd onto the arm and insert your supplied stainless hitch pin.  The pin will keep your gourd from falling off.

Gourd Accommodation: Any plastic or natural gourd can be fitted to these horizontal-style gourd arms.  If your gourds are not already drilled front to back in the upper neck, use a 13/32" drill bit to enlarge the hanging holes.

Four-part pulley system: Each of the pulleys carries a 1/4 of the load.  If your 12 gourds and hub weigh a total of 40 pounds, you are pulling around 10 pounds.  Always wear a good pair of grippy gloves when raising or lowering any gourd rack.

Extras:  Extend the height of the pole by two-feet with the Extension Piece.  

Climbing Predator Protection:  An optional pole guard (PGS or EZ2) that fits a square pole is available.

You may also like...

Conversion Kit shown with Brake Winch
Pine Needles (PN48)

Recently Viewed Items